Product Care

This is how to clean your BRIO products.

Toys made from our natural FSC® - wood can deform and even crack if exposed to too much water, high humidity or high temperatures.
As such, we advise that to clean wooden surfaces, simply wipe them with a lint-free environmentally friendly cloth. Avoid washing with water or using the dishwasher as heat and humidity could break down the material.
Wooden unpainted tracks can be cleaned by lightly sanding to take away any dirty marks. Use a fine sand paper (>= 120 corn) and lightly sand each mark visible on the track until removed. Then wipe the tracks with a dry, lint-free environmentally friendly cloth.
Individually inspect each track for damage or cracking and replace any that have signs of damage.

Always avoid using the dishwasher here as the heat and humidity could take away the printing and break down other materials.
First, try wiping clean the plastic surfaces using a dry, lint-free environmentally friendly cloth. Toothpicks are a good way to get into tight crevices.
If necessary, you can dip the cloth in warm 35°-40°C water (be careful not to burn yourself) with an environmentally friendly mild soap. Allow the plastic to air-dry at room temperature.

We recommend only wiping clean painted or printed surfaces using a dry, lint-free environmentally friendly cloth.

We recommend only wiping clean metal surfaces using a dry, lint-free environmentally friendly cloth.

Always avoid using the dishwasher as heat and humidity could break down the material.
First, try wiping clean the plastic surfaces using a dry, lint-free environmentally friendly cloth. Toothpicks can be used to get into tight crevices
If necessary, you can dip the cloth in warm to hot 45°-50°C water (be careful not to burn yourself) with an environmentally friendly mild soap. Allow the rubber to air-dry at room temperature.

These products are not water-resistant and should never be washed with water.
Try wiping clean the plastic surfaces using with a dry, lint-free environmentally friendly cloth. Toothpicks can be used to get into tight crevices.
Keep in mind:
- Remove batteries when not in use.
- Always check that the battery cover is securely fastened before play.
- Sharp objects will damage sensors (E.g. colour readers).These products are not
  designed for disassembly.
- Triangular screw heads are not to be opened.
- The plastic surfaces can fade over the years due to ageing, so try to avoid strong
  sunlight as much as possible.

Use a tweezer or toothpick to remove hair, fuzz, fur and any other things that may have wrapped around the axel or wheel.
Tires/wheels and axles should rotate freely after removing the blockages.

Always follow the washing instructions that came with the toy:
Usually, wash warm at 30-40 C° in a gentle/delicate cycle without using bleach, dry cleaning, ironing or tumble drying.
Fabrics on our doll prams can be wiped clean using a lint-free environmentally friendly cloth.